afx light SPECTRA-TUBES-FC Manual De Instrucciones página 4

EXPLANATION OF SYMBOLS ON THE SILKSCREEN
The triangle containing a lightning symbol is used to indicate whenever your health is at risk
(due to electrocution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the ap-
pliance.
Class I protection: Connect only to an earthed mains outlet (flight case)
The unit complies with UK standards
Minimum distance between the appliance and other objects
0.5m
Do not stare into the light beam
DO NOT OPEN THE HOUSING
Please read this manual carefully before operating this product.
SAFETY RECOMMENDATIONS
• Please read this manual carefully as it contains important information on the installation, use
and maintenance of this product.
• Please keep this manual for future reference. If you sell the unit to another user, ensure that they
also receive this manual.
• Always ensure that you are connecting to the correct voltage and that the voltage to which you
are connecting is not higher than that indicated on the bottom of the unit.
• This product is a Class I product and must only be connected to an earthed wall socket.
• To reduce the risk of fire or electric shock, do not expose the fixture to rain or moisture. Ensure
that there are no flammable materials near the unit during operation.
• The unit must be installed in a location with adequate ventilation and at least 20 inches (50 cm)
from adjacent surfaces. Ensure that ventilation slots are not blocked.
• The minimum distance from the part of the luminaire or lamp to the illuminated object is 0.5m.
• The maximum ambient temperature (Ta) is 40°C. Don't operate the fixture at higher tempera-
tures.
• The surface temperature of the fixture can reach 60°C. DO NOT TOUCH the enclosure with bare
hands during operation. Turn off the power and allow the fixture to cool for approximately 15
minutes before replacing or servicing.
• Do not operate the fixture continuously for more than 10 hours.
• In the event of a serious operating problem, stop using the unit immediately. Never attempt to
repair the unit yourself. Repairs performed by unqualified personnel may result in damage or
malfunction. Contact your nearest authorised service centre. Always use the same type of re-
placement parts.
• Ensure that the power cord is never pinched or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Do not look directly at the light source when it is on, as this may cause epileptic shock in suscep-
tible persons (especially epileptics).
• The light source of this fixture is not replaceable. When the light source reaches the end of its life,
the entire fixture must be replaced. This product is not intended for domestic use.
• If the external flexible cable or cord of this fixture is damaged, it must only be replaced by the
manufacturer or its service agent or a similarly qualified person in order to avoid hazards.
• The lenses, housing or UV filter must be replaced if they are visibly damaged.
EN 4
USER MANUAL
CAUTION
SHOCK HAZARD
© Copyright LOTRONIC 2024