Publicidad
Idiomas disponibles
Idiomas disponibles
clean the blade protector
shell using, if necessary, a
semi-rigid nylon brush
-
machine
body:
with a damp cloth or a soft
sponge. Carefully dry all
parts of the machine using
a soft cloth.
Finally, assemble the:
- blade:
1) rotate the pulley un-
til the red pin is posi-
tioned on the left side
(or towards the operator)
(Fig.G)
2) insert the blade into
the pulley making sure to
insert the red pin into one
of the three holes on the
blade
3) fix the blade to the pul-
ley by turning the cen-
tral knob of the extractor
clockwise while holding
one of the two side knobs
firmly
4) remove the extractor
from the blade by un-
screwing the two side
knobs making sure that
the blade is firmly fixed to
the pulley.
- blade cover:
1) replace the blade cover
as in the figure E;
2)
slightly
rotate
blade
cover
until it locks into its initial
position;
- meat table:
lift the meat table and
move it to the cutting
position, pressing down
lightly until it clicks (Fig.
B).
MAINTENANCE
Blade maintenance
Cleanse the blade regular-
ly to keep it sharp and func-
tional. Do not wash the blade
in the dishwasher.
clean
Slice maintenance
To keep the linear sliding
of the machine in optimal
conditions, oil the bars using
Berkel lubricants, the use of
other oils could damage the
sliding.
SERVICE
No user-serviceable parts
are inside. Refer servicing to
qualified personnel. All the
repair and replacement op-
erations (like blade replace-
ment, replacement of the
motor belt, replacement of
the sub-basaplate electrical
system components, repair
of structural parts, repair
and/or
sub-baseplate components,
or similar) shall be execut-
ed exclusively by personnel
authorized by the manufac-
turer.
In the event service is need-
ed, please contact Van Berkel
USA, Inc. where the cost of
repair or electrical or me-
chanical adjustment can be
estimated before the repair
the
is undertaken. You may also
clockwise
return your food slicer to Van
Berkel USA, Inc. for servicing.
Please include your return
address and a brief descrip-
tion of the problem or dam-
age to the slicer on a sepa-
rate sheet inside the box.
Send your slicer, insured and
postage prepaid to:
VAN BERKEL USA, INC
5675 NW 84TH AVENUE
DORAL, FL 33166
Retain evidence of shipping
for your protection.
re-placement
of
9
Phone Number - Service De-
partment: 1 (786) 4097052.
E-mail – Service Department:
service@berkelinternational.
com.
WARRANTY AND
RESPONSIBILITY
Van Berkel USA, Inc. ("Van
Berkel") warrants to the first
and original buyer of new
equipment that said equip-
ment, when installed in ac-
cordance with our instruc-
tions within North America
and subjected to normal use
and care, is free from defects
in material or workmanship
for a period of one (1) year
from the date of original
purchase ("Warranty Peri-
od"). Van Berkel will repair
or replace, at our option, any
product or part that is de-
fective in material and work-
manship without charge if
the product is returned to us
postage prepaid with dated
proof of purchase and serial
number within the Warranty
Period. This warranty does
not apply to commercial use
or any product abuse.
VAN BERKEL SPECIFI VAN
BERKEL SPECIFICALLY DIS-
CLAIMS ANY IMPLIED WAR-
RANTY OF MERCHANTA-
BILITY OR EXPRESSED OR
IMPLIED
WARRANTY
FITNESS FOR A PARTICU-
LAR PURPOSE. VAN BERKEL
SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CON-
SEQUIENTIAL DAMAGES TO
BUYER OR ANY THIRD PAR-
TY, INCLUDING, WITHOUT
LIMITATION, LOSS OF PROP-
ERTY, PERSONAL INJURY,
OR STATUTORY OR EXEM-
PLARY DAMAGES, WHETH-
OF
Publicidad
