Product Identification; Brush Cutter Components; Safety; Understanding Safety Symbols - Efco DS 2200 Manual De Instrucciones

Brush Cutter Components (Fig. 1)
1 - Allen key
2 - Combination Wrench
3 - Locking Pin
4 - Simple Harness (only T model)
5 - Bevel Gear
6 - Cutting Attachment Guard
7 - Trimmer Head
8 - Fuel Tank Cap
9 - Purge Bulb
10 - Carburetor Adjustment Screw
11 - Muffler Cover

Understanding Safety Symbols

- This symbol indicates Warning,
and Caution.
- Your manual contains special
messages to bring attention
to potential safety concerns,
machine damage as well as
helpful operating and servicing
information.
ALL THE
CAREFULLY
INJURY
DAMAGE.
- Wear eye, hearing and head
protection when operating this
equipment.
- Wear
protective gloves when handling
the brush cutter and blades.
- Wear safety strong shoes or
boots having skid-proof sole
and anti-piercing insert.

PRODUCT IDENTIFICATION

SAFETY

PLEASE READ
INFORMATION
TO AVOID
AND MACHINE
non-slip, heavy-duty
12 - Spark Plug
13 - Air Filter Cover
14 - Starter Handle
15 - Choke Lever
16 - Throttle Trigger Lockout
17 - Switch
18 - Throttle Trigger
19 - Harness Attachment Point
20 - Loop handle (TR)-(S) / Bike handle (T)
21 - Shaft
- Be aware that objects can be
thrown.
- Keep bystanders away 50 ft (15
m).
- Do not use the brushcutter with
the wood cutting blade.
- On machines with a bent drive
shaft (TR) it is not possible to fit
blades, only line heads.
- WARNING – The surface can
be hot.
en
5