WARNING! This machine is not
suitable for use with disc for wood
(22-60-80 teeth) and relevant metal
guard.
WARNING! – On machines with a
bent drive shaft (TR) it is not possible
to fit disks, only line heads.
WARNING: Fit the blade protection
(M) p.n. 4196086 as shown (Fig.3)
before transporting or storing the
brush cutter.
CAUTION: Never use the brush cutter
without the cup (B, Fig.9) to avoid
damages to the thread.
WARNING: Never touch or adjust
the blade while the motor is running.
ASSEMBLY
The blade is very sharp, always wear
protective gloves when performing
maintenance.
WARNING: After use the bevel
gear may be very hot, always wear
protective gloves when performing
maintenance.
Approved power tool attachments (Fig.19)
The following Emak attachments may be mounted
to the basic power tool:
EH 24
Hedge trimmer (adjustable) (1) (2)
EH 48
Hedge trimmer (adjustable) (1) (2)
EP 100
Pole pruner (2)
(1) Safety boom (A, Fig.9A) must be assembled
under the loop handle.
(2) Not approved for use with bike handle units
(DS 2200 T – DS 2400 T).
en
15