Gardena aquaBloom Set Libro De Instrucciones página 9

2. INITIAL OPERATION
A video of the
setting processes
is available here:
3. FUNCTION
After setting the watering duration and frequency,
the LED will blink twice to confirm the desired
program. The first watering operation will start.
This will be the future watering start time which will
remain unchanged even if the watering duration /
frequency are changed. The watering start time
can be reset by switching to "OFF".
4. STORAGE
To put into storage:
v The product must be stored away from children.
5. TECHNICAL DATA
Solar-powered irrigation
Rated Power
Rated current
Rated voltage
Max. delivery capacity
Max. delivery head
Max. suction height
Max. media temperature
Weight
Battery capacity at 1.2 V
GAR_13300-20.960.07_2023-12-14.indb 9 GAR_13300-20.960.07_2023-12-14.indb 9
v (Fig. 1 – 6)
v (Fig. 7)
Unit Value
W 1
A 0.13
V 3.6
l/h 10
m 4
m 1.5
°C 35
g 365
Ah 2.4
Fig. 3: Place the water control in a sunny
place and avoid shaded areas. When using the
aquaBloom for the first time, place it in the sun
for 8 hours with the rotary knob turned to "OFF"
or charge the rechargeable batteries separately.
The LED colour indicates the current battery
charge status:
– Green = Ready for watering.
– Orange= Ready for watering. Place the
aquaBloom in a sunny spot or charge the bat-
teries with an appropriate battery charger, if no
sunshine is expected during your absence.
– Red = Watering not possible anymore.
It is necessary to place the aquaBloom in direct
sunlight or recharge the batteries separately.
1. Remove the batteries.
2. Before the onset of frosty weather,
store the watering system in a place
that is protected from frost.
9
15.12.23 11:35 15.12.23 11:35