Descargar Imprimir esta página

Kärcher CV 30/2 Bp Manual página 11

Ocultar thumbs Ver también para CV 30/2 Bp:

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Pull the suction pipe out of the
mount. The brush motor is switched
off.
2. Attach the desired accessory to the
suction tube.
3. Perform cleaning.
Switching off the device
1. Switch off the device at the main
switch.
Transport
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
1. Carry the device by the carrying
handle.
2. When transporting the device in ve-
hicles, secure it to prevent it from
slipping or overturning in accord-
ance with the respective valid guide-
lines.
Storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
The device may only be stored in-
doors.
1. Press the unlocking button and re-
move the battery pack to prevent
discharge.
Care and service
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the battery pack.
Maintenance intervals
1. Perform semi-automatic brush
cleaning.
2. Check roller brush for heavy soiling.
If necessary, clean the roller brush
manually.
Note
Visual brush inspection: The degree of
wear can be determined by comparing
the differently coloured indicator tufts.
Replace the roller brush when the
black bristles are the same height as
the red bristles.
1. Check the wear of the roller brush.
Changing the filter bag
1. Unlock and remove the filter cover.
2. Press the filter bag lock to the right
and at the same time pull the filter
bag downwards by the flange. Re-
move the filter bag, close it and dis-
pose of it.
Illustration H
3. Insert the new filter bag and pull the
opening of the filter bag over the
suction connection as far as it will
go. The locking mechanism of the fil-
ter bag engages.
4. Insert the filter cover and engage
audibly.
Cleaning the roller brush
1. Turn the twist locks by 90° with a
coin, fold out the brush cover and re-
move it.
Illustration I
2. Cut off hair and threads wound onto
the roller brush using scissors and
remove them.
3. Install brush cover in reverse order.
English
Daily
Weekly
manually
11

Publicidad

loading

Este manual también es adecuado para:

Cv 30/2 bp pack