Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the HEPA filter
1. Unlock and remove the filter cover.
2. Unlock the HEPA filter, swing it up-
wards and remove it.
Illustration C
3. Slide the new HEPA filter into the
holder, swivel it downwards and lock
it in place.
Illustration J
4. Insert the filter cover and engage
audibly.
Replacing the motor protection
filter (optional accessory)
1. Unlock and remove the filter cover.
2. Slide out the motor protection filter
(optional accessory), remove and
dispose of it.
Illustration K
3. Insert the new motor protection filter
(optional accessory) and snap it into
place.
Illustration D
4. Insert the filter cover and engage
audibly.
Replacing the roller brush
1. Turn the twist locks by 90° with a
coin, fold out the brush cover and re-
move it.
Illustration I
2. Push the roller brush to the left as far
as it will go, swing it out, remove it
and dispose of it.
Illustration L
3. Install the new roller brush in the re-
verse order.
4. Install brush cover in reverse order.
Troubleshooting guide
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the battery pack.
12
Note
The device must be switched off imme-
diately if a malfunction occurs (e.g. fil-
ter breakage). The malfunction must
be eliminated before switching the de-
vice on again.
Remove the blockage
Suction pipe/suction hose
Illustration M
Illustration N
Note
When inserting the suction hose into
the suction hose port, make sure that it
engages in place.
Suction hose at brush head
Illustration O
Roller brush/brush head
Illustration P
Note
If necessary, remove the brush cover
(see "Cleaning the roller brush manual-
ly").
E1
Suction volume too low, indicator light
flashes
1. Replace the filter bag.
2. Remove blockages from the brush
head, suction pipe and suction
hose.
E2
Turbine error, indicator lamp flashes
1. Switch off the device and wait 1 min-
ute. Switch the device back on.
2. If the fault occurs repeatedly, notify
customer service.
E3
Power transmission to roller brush in-
terrupted, indicator lamp flashes
1. Notify Customer Service.
English
Error codes
Publicidad
