Chauvin Arnoux PEL 115 Guia De Inicio Rapido página 5

QUICK START GUIDE TO THE PEL 115 (EN)
7 indicators providing
status information.
QR code.
Bag to stow the waterproof
plugs of the terminals.
On/Off key.
■ To put the instrument into operation, connect the
terminals to mains.
■ To stop the instrument, disconnect the terminals and
press the button for several seconds.
You cannot switch the PEL off while it is connected to
a power source or while recording is in progress (or
pending).
Connector for external power supply
(optional mains power unit).
USB connector.
RJ45 Ethernet
connector.
Selection key.
Press the key and hold it down. The REC and
indicators light one by one, for 3 seconds each.
Release the key while the desired function is lit.
■ If you release it while the REC indicator is lit,
recording starts or stops.
■ If you release it while the
activated or de-activated.
LCD display unit.
Slot for SD card.
PEL 115
POWER & ENERGY LOGGER
Directional keypad: four navigation
keys and one validation key
(Enter key).
indicator is lit, Wi-Fi is