Publicidad
Idiomas disponibles
Idiomas disponibles
Portable D ishwashers
Connecting a Portable
1. Turn on the faucet at the sink until the water runs
hot. Turn off the faucet.
2. Pull the connector
from the recess in the back of
the dishwasher.
3. Press down on the thumb release and lift the
connector
onto the faucet.
4. Remove pressure from the thumb release and tug
slightly on the connector
to be sure it is securely in
place.
5. Turn the hot water on full force.
6. Check that the sink drain is open so water from the
dishwasher
can drain properly.
7. Pull the electrical cord from the recess. Plug it into
a properly grounded
outlet.
8. Select the proper cycle and options for the load and
start the dishwasher.
Care and Cleaning
Clean the cabinet and laminate top with a soft, damp
cloth and liquid spray cleaner.
To polish and protect the laminate top, use a product
specifically
developed
for countertops
such as Hope's
Countertop
Polish*.
Apply an appliance wax to the cabinet once a year.
Disconnecting a Portable
1. Be sure to turn the water supply off and press the
pressure release button before removing the
connector.
2. Press down on the thumb release and remove the
connector
from the faucet.
3. Push the connector
and hoses back into the
cabinet recess.
4. Unplug the electrical
cord and push it back into the
cabinet recess.
Release
Button
Note:
To protect
the laminate
top from
damage,
do not use it as a cutting surface or
resting place for warm/hot
cookware.
Do not
slide ceramic
or other hard or abrasive
objects
across the surface.
* Brand names are the trademarks
of the respective
man ufactu rer.
Publicidad
