Do not use the product as a replace-
ment voltmeter.
Exercise caution with studs. These are
sharp and can cause injury.
Please note that inaccurate measure-
ment results can be obtained under
certain conditions. The following con-
ditions can cause inaccurate meas-
urement results:
– very thick walls
– weak battery
– deep-lying wires or pipes
– shielded AC wires
– thick walls with thin pipes or wires
– metal-clad walls
– very damp conditions
Using this product you cannot detect
wires in an electric circuit
– that are insulated from the mains
power supply.
– that have a direct current flowing
through them.
– that are used for computer or tele-
communication systems.
38 GB/IE
WARNING! Be careful
when pressing the stud buttons
,
. The sharp needles
5
11
can cause injury (see Fig. E).
Information
regarding inaccurate
measurement
results