Publicidad
Idiomas disponibles
Idiomas disponibles
Detection of wooden
objects
1. For the detection of wooden objects,
proceed as described in the section
„Detection of various objects".
2. If you have found something with the
multi-purpose detector, mark it.
3. To be sure that the found object is
made of wood, slide the material
switch
Look for metal at the same point.
4. If the product does not find anything
at this point in the mode "METAL",
the object is made of wood. If the
product finds an object at this point in
the modus "METAL", then the object
is made of metal.
5. In this case, look in a different place
in the "STUD" mode, and repeat
steps 1 to 4.
Tips on measurement
- The calibration button must remain pressed
during the entire search process (cali-
bration and search).
- If you calibrate too closely to the object
or directly on the object, the calibration
can fail. If the calibration fails, the LC
display shows the full intensity and a
long beeping tone sounds or can't
search any object in the wall.
- Move and hold the device several cen-
timeters further to the right or left of the
to the position "METAL".
3
GB/IE
49
Publicidad
