17 18 19
17. Engine Oil Dipstick
18. Spark Plug
19. Electronic Fuel Injection Unit
20. Fuel Valve
21. Oil Pipe
Operation Panel
1
2
3
6
ENG.SW.
START
ON
OFF
20
21
22
22. High-Pressure Oil Pipe
23. Fan Hood
24. Fuel Filter
25. Fuel Pump
1. Engine Switch
Used to start or stop the generator. Refer to the
Using the Generator section for more detailed
information.
2. AC Outlet*
Used to connect with electric devices. The outlet
meets the IP44 protection rating. Make sure to
reinstall and fasten the outlet shield when not in
use.
3. Ground Terminal
Use a ground cable and connect one end to
the ground terminal and the other end to the
ground. Proper grounding can help to avoid
electric shocks in case of device failure.
* The AC power output of the generator may differ
depending on your country and region. Refer to the
Specifications section for details.
Generators sold in some countries and regions have
a frequency switch on the control panel. Make sure
to select the appropriate frequency (50 Hz / 60 Hz)
according to regional requirements.
23
24 25