cecotec ENERGYSILENCE AERO 10000 PRO Manual De Instrucciones página 47

To reduce wobble, try the following:
- Check that all of the blade mounting screws are tightened and secure.
- Fan wobble may be caused by the unevenness of the fan blades. To check the blade level,
measure the distance from each blade tip to the ceiling.
If measurements are irregular
- Be sure the blade mount screws are not too tight or too loose, which may cause wobbling
due to an unlevelled blade tip.
- A deformed blade can cause wobbling. Check by removing the blade and placing on a flat
surface.
- Blade tracking may be checked simply by use of a household ruler. Place the ruler vertically
against the ceiling and even with the outside leading edge of a blade. Note the distance of
the edge of a blade compared to the others. Turn the blade slowly by hand to check the
remaining blades.
- If a blade is not in alignment, the blade is either out of shape, warped or the blade screws
are not evenly tightened or either loose.
7. TECHNICAL SPECIFICATIONS
Product reference: 08568
Product: EnergySilence Aero 10000 Pro
Voltage: 220-240 V
Frequency: 50 / 60 Hz
Power: 80 W
Description
Fan maximum flow
Fan power consumption
Service value
Power consumption on standby mode
Fan sound power level
Maximum air speed
Service value measurement standard
Contact details to obtain more
information
Symbol Value
F
P
SV
P
SB
L
WA
C
IEC 60879
Cecotec Innovaciones SL.
Av. Reyes Católicos, No 60, 46910, Alfafar
(Valencia, Spain)
ENERGYSILENCE AERO 10000 PRO
ENGLISH
Unit
m /min
3
W
(m /min)/W
3
W
dB (A)
m/seg
47