Publicidad
Idiomas disponibles
Idiomas disponibles
EN
HAND-HELD MICROPHONE
1.- Battery status indicator light:
2.- Transmission frequency indicator
3.- Hand-held microphone on/off switch.
4.- Battery holder. Use 2 x 1.5 V batteries type LR6-AA, preferably alkaline. When inserting the batteries,
make sure that the polarity is correct.
BELT-PACK MICROPHONE
1
4
2
3
4
1.- Antenna.
2.- Battery status indicator light:
3.- Transmission frequency indicator
4.- Battery holder. Use 2 x 1.5 V batteries type LR6-AA, preferably alkaline. When inserting the batteries,
make sure that the polarity is correct.
5.- VOL-/VOL+: microphone audio volume control.
6.- LED power indicator.
7.- Belt-pack microphone on/off button by long pressing of the button.
8.- Microphone connector, miniXLR connector.
9.- Clip-on belt-pack microphone. MiniXLR connector (PIN 1: ground, PIN 2: not connected,
4
PIN 3: signal).
1
2
3
correct battery level,
5
1.5V AA
1.5V AA
correct battery level,
- 4 -
4
low battery level.
PIN 3
6
7
8
low battery level.
Publicidad
