EN
BLUETOOTH MODE
-
Select Bluetooth mode. The display will show BLUE. BLUE flashing indicates that no connection has
been established with a device and when it stops flashing it indicates that it is connected.
-
To connect your device, open the Bluetooth settings screen on your smartphone or tablet. Activate the
Bluetooth function, select the MALIBU-312 and pair with it.
NOTE: this player remembers the last connected device. So, you will not need to do this linking process
and the linking will be done automatically.
-
Select the music on your smartphone/tablet and start playback.
-
Make sure your smartphone/tablet is loud enough to be heard through the speaker. In this way, you
can control the volume from the MALIBU itself at a later time without having to manipulate any other
equipment.
-
Press / , on the player or on the remote control, to change songs or to
FM MODE
-
Select FM mode. The display will show the tuned frequency (000.0 MHz).
-
Perform an automatic tuning of the stations to start using this mode by short pressing the button
-
Once you have finished, you can select the station you want to listen to from among those tuned in with
/ in the front panel or on the remote control.
LINE MODE
-
Connect your audio device (Smartphone, tablet, PC, etc.) via a stereo audio cable to the LINE IN input
on the rear panel.
-
Select line input mode. The display will show LINE.
-
Select the music on your device and start playback.
-
Make sure your device is loud enough to be heard through the speaker. In this way, you can control the
volume from the MALIBU itself at a later time without having to manipulate any other equipment.
MICROPHONE RECORDER
The recording function will only record the signal from the microphones regardless of the mode selected on
the player.
1.- Connect the microphones you wish to record (wired or wireless) and adjust their volume, echo effect
and equalisation.
2.- Connect a recording drive to the USB port or microSD slot. While recording you can listen to the music
as you record the voice by selecting the mode on the player as long as it is not the same mode you are
using for the recording.
NOTE: USB device has priority over microSD card.
REC button on the player or remote control and press it again to stop recording. Pressing
3.- Press the
again will start a new recording. The recording can be paused and resumed with the
4.- To play back these recordings, long press the
The recordings are stored in a REC folder on the USB or microSD card and will be named 00000.MP3.
REC button on the player or on the remote control.
- 6 -
pause/resume playback.
button.
.