Zummo Z1 Manual De Usuario página 29

The display will show the number of oranges to be squeezed. The machine is now ready for operation.
Important Notice
The normal use of the machine may cause the plastic parts that are exposed to juice to turn orange colour. This
is completely normal and does not imply a hygiene problem or affect the physical properties of the plastic.
The reference 1003031A Nut Z1 must not be subjected to temperatures higher than 40°C, so they
should never be washed in very hot water or in a dishwasher; if they are deformed by heat, the warranty
will not apply.
6.7. ADVICE FOR USE
•
Always make sure you are using the right squeezing set of Ball, Cup for the size of oranges you
wish to squeeze. If the orange to squeeze is too big or too small for the squeezing kit used, the
quality of the juice may decrease, resulting in a bitter juice flavour.
•
To get as juice as possible, it is desirable that the Cup are not much larger than the orange you are
using.
•
If the orange has a very thin peel, we recommend that you add a washer reference V0227 under
the squeezing ball.
•
We recommend to switch off the machine when is not in use (Fig. 9).
6.8. SAFETY SYSTEMS
The machine is equipped with several safety systems:
1 If the front cover is not assembled or is improperly assembled, the display will show an
Error message with the area of the front cover flashing.
2 If the tray is not assembled or is not in place, the machine will not operate and the display
will show an Error message by displaying a flashing dark tray.
3 If the upper protective is not assembled or is not in place, the machine will not operate and
the display will show an Error message by displaying a flashing dark upper protective.
29