VALBERG CNF 304 C WD X180C Instrucciones De Uso página 12

B
Product usage
6. When the refrigerator with a display on door, remove part  from the top left side of upper
cover and take out part . Then remove part  and put part  into the top right side of
upper cover. Refer to above operation, install part  and part  on to the top left side
of upper cover. Install part  of the top right side of upper cover. When the refrigerator
without a display on door, skip this step.
Screw hole cover
Screw hole cover
MODEL WITHOUT DISPLAY
Corner cover (left)
Electrical connector (left)
Corner cover (right)
Electrical connector (right)
MODEL WITH DISPLAY
10 EN