Publicidad
Idiomas disponibles
Idiomas disponibles
APPARTAMENTO
5
- START-UP
We assume the machine has been installed
correctly.
■ Make sure that the lever is positioned
vertically (OFF - fig._5.6)
■ Turn the On/Off switch (1 - fig._5.1) from
position "O" to "I". After switching it on you
get:
APPARTAMENTO model: the indicator
light (2 - fig._5.1) lights up steady green.
APPARTAMENTO TCA model: the indica-
tor light (2) is blue when switched on and
turns white when the machine is running.
fig_5.1
MACHINE
■ Open the steam knob (3 - fig._5.2) to start
UNDER
filling the boiler with water.
MAINTENANCE
fig_5.2
54
APPARTAMENTO model: you should
hear the sound of the pump.
APPARTAMENTO TCA model: you
should hear the sound of the pump and
the indicator light (2 - fig._5.1) will flash
with a BLUE light.
When the boiler is correctly filled with water,
the pump stops (the noise stops).
■ Then close the steam knob.
The boiler heating begins.
Wait for the boiler pressure gauge (4 -
fig._5.3) to indicate approximately 1 bar.
■ Open the steam knob (3 - fig._5.4) for 5
seconds to allow some steam to come
out.
This operation is highly im-
i
portant as it eliminates any
vacuum inside the boiler which
may cause milk to be sucked
into the boiler once steam dis-
pensing has begun. Close the
fig_5.3
fig_5.4
Publicidad
