Publicidad
Idiomas disponibles
Idiomas disponibles
7
- PROGRAMMING
(APPARTAMENTO TCA only)
The machine, which is being
i
tested, has already under-
gone basic programming and
is therefore ready for use.
The user can vary certain machine param-
eters by entering the 'programming' mode
and operating the coffee dispensing lever
(1 - fig_7.1) and indicator light. (2)
The user-modifiable parameters are as
follows:
1. Boiler pressure (red).
2. ECO MODE of the machine (green).
7.1
Access to
programming
To access programming, the user must pro-
ceed as follows:
yellow light
fig_7.1
APPARTAMENTO
1. Turn off the ma-
chine by turning the
selector switch to the
OFF position
2. Raising the cof-
fee dispensing lever
3. Switch on the
machine
4. When the indi-
cator light changes
colour (yellow) lower
the dispensing lever
2 (within 3 seconds).
The machine is now
i n p r o g r a m m i n g
mode
5. To switch from
one parameter to
another, confirm the
previous one by hold-
ing the lever up for 3
seconds (waiting for
the light to go on) and
only then lower it.
6. Each parameter
is identified by an in-
dicator colour and its
number of flashes de-
termines the setting
value as described in
the table below
59
Publicidad
