Rocket Espresso Milano APPARTAMENTO Manual De Uso Y Mantenimiento página 60

APPARTAMENTO
7.2 Programming parameters
Editable
parameter
Boiler pressure adjust-
ment
Stand-By
7.3 Saving a programming
parameter
Example of MEDIUM BOILER PRES-
SURE setting.
1 Enter the programming mode, the light is
flashing once in RED colour indicating the
LOW Boiler Pressure setting.
2 Raise and lower the lever, the RED light
will flash twice, indicating the MEDIUM
Boiler Pressure setting.
3 Keep the dispensing lever raised until the
steady RED light is displayed.
4 Steady RED light confirms that the param-
eter has been saved. Lower the lever to
move on to the next parameter.
To exit programming, restart the machine by
pressing the main switch.
60
LED colour
RED
GREEN
1. After identifying
the number of flash-
es corresponding to a
certain parameter, lift
the dispensing lever,
holding it in position
for 3 seconds, until the
light remains steady.
2. Confirmation that
the parameter has
been saved is con-
firmed by the steady
LED light. Lower the
dispensing lever to
move to the next pa-
rameter.
Status
selectable
Low
Medium
(default)
High
Very high
Not active
Active
(after 30 minutes)
7.4 Changing the status of
a parameter
1. To switch between
1
states of a parameter
(number of flashes)
quickly (within 3 sec-
2
onds) raise and lower
the dispensing lever.
Command
No. 1 flash
No. 2 flashes
No. 3 flashes
No. 4 flashes
No. 1 flash
No. 2 flashes