Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Key
Function
Maintaining heat
in the cooking
zone
Timer setting
1) Press the keep warm button, confirm that this mode has been activa-
ted or deactivated in the desired cooking zone, and the indicator light
will turn on or off accordingly;
2) Long press this button and the whole system will enter/exit this mode;
1) The timer time can be set from 00:00-3:00h;
2) When the main unit is in operation, press the Timer button to activate
the timer, the display shows "00:00", the timer icon flashes for 3 seconds,
and the time indicator stays on. If no operation is performed within 3 se-
conds, the system is automatically deactivated from the setting state;
3) Use the slider to set the timer time in the order of hour, minute and se-
cond. During each setting, the display will flash, the setting time of each
time will be 3 seconds, the timeout will automatically switch to the next
setting time, short press the time key to quickly switch to the next time,
all times will be set to enter the working timer status, and the timer icon
corresponding to the cooking zone will keep on;
4) When several cooking zones are active and the timer is not working,
the final confirmation of the timer time will be displayed. When the timer
is running, the timer time is displayed first. If there is a confirmation of the
cooking zone, the timer time is displayed during the confirmation period.
When the timer is running, if the remaining time is less than 1 minute, the
display shows the second countdown.
59
How to use
English
infiniton.es
Publicidad
