Publicidad
Idiomas disponibles
Idiomas disponibles
EN
PREPARATION FOR USE
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated
and has less hot air. Do not locate the refrigerator near a heat source such as
cooker, and avoid it from direct sunlight, thus guaranteeing the refrigeration
effect while saving energy consumption. Do not locate the refrigerator in the
damp place, so as to prevent the refrigerator from rusting and leaking electricity.
The result of the total space of the room in which the refrigerator is installed being
divided by the refrigerant charge amount of the refrigerator shall not be less than
1 m³ (space)/8 g(refrigerant).
Note: The amount of refrigerant charged for the refrigerator can be found on the
nameplate.
Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least
30 mm of free space should be spared at the top side, more than 100 mm on both
sides, and above 50 mm at the back side of the refrigerator.
Dimensions in mm:
W
D
H
A
B
°C
E
E
470
447
831
800
874
130±5
50
100
Note: Figures 1 and 2 only illustrate the space demand of the product.
31
Publicidad
