Publicidad
Idiomas disponibles
Idiomas disponibles
EN
34
GETTING STARTED AND OPERATION
Testing
1.
Clean the parts of the refrigerator with lukewarm water containing a little
neutral detergent and with clear water, and wipe them dry.
Note: : Electric parts of the refrigerator can only be wiped by dry cloth.
2.
Turn the thermostat knob to the "2" position, and plug the freezer into the
wall outlet. The compressor will begin to run.
3.
Check, after 30 minutes of operation, to ensure that the freezer is cold.
Temperature Control
The temperature of the appliance can be adjusted by turning the thermostat dial.
The thermostat can be set between 1 and 7.
•
1 is the warmest setting.
•
7 is the coldest setting.
•
Set the dial to OFF to turn off the cooling function.
•
Under the normal operating condition (in spring and autumn), it is
recommended to set the temperature at 4.
•
In summer when the ambient temperature is high, it is recommended to set
temperature at 3-4. so as to guarantee the fridge and freezer temperatures
and reduce the refrigerator continuous running time; and in winter when the
ambient temperature is low, it is recommended to set temperature at 5-6 to
avoid frequent start/stop of the refrigerator.
Notes: The temperatures may vary with respect to setting's ones due to
compressor cycles and outside conditions.
Publicidad
