Klarstein BEERCRACKER 90L Manual Del Usuario página 32

EN
Leveling the fridge
If the fridge is not level, the door and magnetic seal alignment will be affected
and may cause you fridge to work incorrectly. Once the fridge is placed in its final
location, adjust the levelling feet at the front by turning them.
Cleaning before use
Wipe the inside of the fridge with a weak solution of bicarbonate of soda. Then
rinse with warm water using a damp sponge or cloth. Wash the baskets and
shelves in warm soapy water and dry completely before replacing in the fridge.
The external parts of the fridge can be cleaned with wax polish.
Before plugging in you must check that you have a socket which is compatible
with the plug supplied with the fridge.
Before switching on
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE.
The coolant fluid needs time to settle. If the appliance is switched off at any time,
wait 30 minutes before switching back on to allow the coolant fluid to settle.
Before filling your fridge
Before storing foods in your fridge, turn the fridge on and wait for 24 hours,
to make sure it is working properly and to allow the fridge to fail to the correct
temperature.
32