Fit the supply plug into the power outlet.
Press the ON/STAND-BY button
chine on.
The machine will emit an acoustic signal
All buttons will come on to a steady white light, whereas
the alarm warning lamps will come on to a steady orange
light over an instant.
MACHINE SETTING
to switch the ma-
.
41
The coffee machine starts the heating cycle. The ON/
STAND-BY button
will start blinking to a light white.
The machine will be ready when the ON/STAND-BY
button
stops blinking and the supply button lights are
steadily.
By pressing one of the supply buttons during the heating
cycle, you can reserve the beverage that will be supplied at
the end of the heating
cycle.
Upon the first machine start-up, you shall supply 0.5 li-
tres of water, with no capsule inserted and keeping the
lever lowered. Place a cup under the supplying spout.
Press the FREE DOSE
to end.
Open and close the lever before removing and emptying
the cup.
Empty the cup and supply one more time, by pressing the
FREE DOSE
button again.
E N
button and wait for the supply