LAVAZZA IDOLA Instrucciones De Uso página 60

EN I T
Problem encountered
ON/STAND-BY
button blinking
red.
The loading lever does not reach the
supply position or requires an excessive
closing effort.
Coffee is dispensed too fast and,
therefore, it is not so creamy.
The coffee is cold.
TROUBLESHOOTING
Possible causes
» Inadequate machine storing
conditions / Temporary lock.
» Spent capsule drawer filled.
» Capsule stuck.
» A previously used capsule is used.
» Capsule not present.
» Capsule not compatible.
» Slow supplying, hydraulic circuit
clogged with lime-scale.
60
Solution
» Unplug the machine from the power
socket and allow it to rest at room
temperature enough time (Max. 1
hour). Plug the machine in again,
then press the switch-on button
(make one attempt only).
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.
» Empty the tray and make an attempt
at closing the lever.
» Open and close the lever to drop the
capsule.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.
» Use a new capsule.
» Insert the capsule.
» Try again by using another capsule
from a different package.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.
» Perform the descaling procedure by
means of the Lavazza descaling agent.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.