Descargar Imprimir esta página

Ryobi AC0i2001 Manual Del Operador página 9

Cargador mantenedor para baterías

Publicidad

Idiomas disponibles

Idiomas disponibles

PRODUCT SPECIFICATIONS
Input ..................................................................................................................................... 120 Volts, AC only, 60 Hz, 0.4A
Output ............................................................................................................................. 6 Volts, 1 Amp or 12 Volts, 2 Amps
KNOW YOUR BATTERY MAINTAINER
See Figures 1 - 2.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual.
Before use of this product, familiarize yourself with all oper-
ating features and safety rules.
BATTERY CHARGING CABLE
Use the battery charging cable with cover to connect 6 and
12 Volt lead acid batteries to the battery maintainer.
NOTE: Place cover onto the battery charging cable when
not in use.
UNPACKING
This product has been shipped completely assembled.
„ Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
„ Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
„ Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
FEATURES
PRECISION CHARGING
The maintainer automatically detects the ambient tempera-
ture and alters the charge to eliminate over-charging in hot
climates and under-charging in cold climates.
RESTORE YOUR BATTERY
Detects sulfation and acid stratification and restores lost per-
formance for stronger engine starts and extended battery life.
VOLTAGE SELECTOR BUTTON
The voltage selector button lets the operator choose between
6 volt and 12 volt operation.
ASSEMBLY
PACKING LIST
Battery Maintainer
Battery Clamps (2)
Terminal Rings (2)
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury. Do not use this product with third party
accessories.
6 — English

Publicidad

loading