REMS Cobra 22 Instrucciones De Servicio página 7

eng
changing accessories, or storing power tools. Such preventive safety meas-
ures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired by a qualified expert
or by an authorised REMS after-sales service facility before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Secure the workpiece. Use clamps or a vice to hold the workpiece. This is safer
than holding it with your hand, and also it frees both hands to operate the equipment.
h) Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power
tool, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in
a hazardous situation. All unauthorised modifications to the power tool are
prohibited for safety reasons.
E) Battery tool use and care
a) Ensure the switch is in the off position before inserting battery pack. Inserting
the battery pack into power tools that have the switch on invites accidents.
b) Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery may create a risk of fire when used with
another battery pack.
c) Use battery tools only with specifically designated battery packs. Use of
any other battery packs may create a risk of injury and fire.
d) When battery pack is not in use, keep it away from other metal objects like
paper clips, coins, keys, nails, screws, or other small metal objects that
can make a connection from one terminal to another. Shorting the battery
terminals may cause bums or a fire.
e) Under abusive conditions, liquid may be ejected from the battery, avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or bums.
f) Do not use the battery/charger at battery/charger temperatures or ambient
temperatures of ≤ 5°C/40°F or ≥ 40°C/105°F.
g) Do not dispose of defective batteries in the normal domestic waste. Take
them to an authorised REMS after-sales service facility or to a reputed
waste disposal company.
F) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
b) Comply with maintenance instructions and instructions on tool replace-
ments.
c) Check mains lead of power tool regularly and have it replaced by a qualified
expert or an authorised REMS after-sales service facility in case of damage.
Check extension cable regularly and replace it when damaged.
Specific Safety Instructions
WARNING
● The machine must be connected to a socket with a functioning protective earth
(earthed wire). In case of doubt, check or let check the functioning of the earthed
wire.
● Wear rubber boots when the floor is wet (insulation).
● Only operate the machine off the mains using a 30mA fault current protected
switch (FI breaker).
● Introduce the rotating cable only when wearing the special glove provided, which
permits the cable to run smoothly through the hand. Unsui table gloves, particu-
larly rubber gloves, „stick" to the cable. This can lead to accidents. For the same
reason, never introduce the rotating cable with a cloth.
● Never work without first installing the guard for the chuck mount and the guide
hose for the cable. This is because the end of the cable projecting from the
machine will twist suddenly if the drain cleaning tool comes up against some form
of resistance and seizes.
1. Technical Data
1.1. Article numbers
REMS Cobra 22 drive unit with guide hose
REMS Cobra 32 drive unit with guide hose
Adapter drum Cobra 22/8
Adapter drum Cobra 32/8
Guide gloves, pair
Riveted guide glove, left
Riveted guide glove, right
Guide hose Cobra 22
Guide hose Cobra 32
Drain cleaning cables
Drain cleaning cable 8 × 7.5 m
Drain cleaning cable 16 × 2.3 m
Drain cleaning cable 22 × 4.5 m
Drain cleaning cable 32 × 4.5 m
Drain clean. cable 16 × 2.3 m (6 pcs.) in cable carrier
Drain clean. cable 22 × 4.5 m (5 pcs.) in cable carrier
Drain clean. cable 32 × 4.5 m (5 pcs.) in cable carrier
Drain cleaning cable S 16 × 2 m
Drain cleaning cable S 22 × 4 m
Drain cleaning cable S 32 × 4 m
Drain cleaning cable with core 16 × 2.3 m
Drain cleaning cable with core 22 × 4.5 m
Drain cleaning cable with core 32 × 4.5 m
Cable reduction 22/16
Cable reduction 32/22
Cable carrier 16 (empty)
Cable carrier 22 (empty)
Cable carrier 32 (empty)
Cable joint separator 16
Cable joint separator 22/32
Drain cleaning tools
Straight auger 16
Straight auger 22
Straight auger 32
Bulbous auger 16
Bulbous auger 22
Bulbous auger 32
Funnel auger 16
Funnel auger 22
Funnel auger 32
Retrieving auger 16
Retrieving auger 22
Retrieving auger 32
Serrated blade borer 16/25
Serrated blade borer 22/35
Serrated blade borer 22/45
Serrated blade borer 32/55
Serrated cross-blade borer 16/25
Serrated cross-blade borer 16/35
Serrated cross-blade borer 22/35
Serrated cross-blade borer 22/45
Serrated cross-blade borer 22/65
Serrated cross-blade borer 32/45
Serrated cross-blade borer 32/65
Serrated cross-blade borer 32/90
Serrated cross-blade borer 32/115
Forked cutter 16
Cross-forked cutter 16
Serrated forked cutter 22/65
Serrated forked cutter 32/65
Serrated forked cutter 32/90
Root cutter 22/65
Root cutter 32/65
Root cutter 32/90
Chain flail 16, smooth rings
Chain flail 16, spiked links
Chain flail 22, smooth rings
Chain flail 22, spiked links
Chain flail 32, smooth rings
Chain flail 32, spiked links
1.2. Working range
REMS Cobra 22
Cable Ø 8 mm (max. working length 10 m)
Cable Ø 16 mm (max. working length 40 m)
Cable Ø 22 mm (max. working length 70 m)
REMS Cobra 32
Cable Ø 8 mm (max. working length 10 m)
Cable Ø 16 mm (max. working length 40 m)
Cable Ø 22 mm (max. working length 100 m)
Cable Ø 32 mm (max. working length 70 m)
1.3. Working speed
Working spindle
1.4. Electrical data
172000
Rated voltage
174000
Power input
Rated current
170011
Intermittent service
170012
Protection class
172610
172611
1.5. Dimensions (L × W × H)
172612
Drive unit
044110
044105
1.6. Weights
REMS Cobra 22 drive unit
170200
REMS Cobra 32 drive unit
171200
Tool set 16
172200
Tool set 22
174200
Tool set 32
Pipe Ø 10 – 50 (75) mm
Pipe Ø 20 – 100 mm
Pipe Ø 30 – 150 mm
Pipe Ø 10 – 50 (75) mm
Pipe Ø 20 – 100 mm
Pipe Ø 30 – 150 mm
Pipe Ø 40 – 250 mm
REMS Cobra 22 REMS Cobra 22
740 ¹/min 520 ¹/min
230 V 1~; 50 Hz 230 V 1~; 50 Hz
750 W 1050 W
3.3 A 5.8 A
AB 7/10 min AB 3,5/10 min
IP 44 F IP 44 F
535 × 225 × 535 mm 535 × 225 × 595 mm
21" × 8.9" × 21" 21" × 8.9" × 23.4"
19.1 kg (42.2 lb)
24.6 kg (54.6 lb)
1.8 kg (4.0 lb)
2.3 kg (5.1 lb)
1.9 kg (4.2 lb)
eng
171201
172201
174201
171205
172205
174205
171210
172210
174210
172154
174154
171150
172150
174150
171151
172151
171250
172250
174250
171265
172265
174265
171270
172270
174270
171275
172275
174275
171280
172280
172281
174282
171290
171291
172290
172291
172293
174291
174293
174295
174296
171305
171306
172305
174305
174306
172310
174310
174311
171340
171341
172340
172341
174340
174341