Publicidad
Idiomas disponibles
Idiomas disponibles
responsible structural engineer, architect or person in charge of the building project before beginning the
work.
Additional notes on the use of the guards
To avoid the risks below always use the correct guard, see the section headed: "Suitability of wheels for the
equipment used".
▶ If the Standard guard with front cover is used for surface grinding, the guard can touch the workpiece
and thus lead to loss of control.
▶ If a wire brush of a thickness exceeding the maximum permissible thickness is used, the wires can snag
on the guard and break.
▶ If the standard guard is used for cutting off metal with an abrasive cut-off wheel, there is an increased
risk of exposure to sparks and particles and to wheel fragments if the wheel breaks.
▶ If the standard guard is used with or without front cover for cutting or for grinding concrete or masonry,
there is a higher dust load and an increased risk of losing control of the product, which can lead to
kickbacks.
3
Description
3.1
Product overview
3.2
Intended use
The product described is a hand-held electric angle grinder. It is designed for cutting and grinding metal and
mineral materials, as well as brushing and sanding, without the use of water. It may used only for dry cutting
/ grinding.
•
The power tool may be used for cutting, slitting and grinding mineral materials only when equipped with
the corresponding guard and front cover.
•
A dust removal hood together with a suitable Hilti vacuum cleaner must be used for working on mineral
materials such as concrete or stone.
3.3
Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, wrench, operating
instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
*2381083*
1
2381083
Spindle lock button
@
Dust filter
;
Vibration-absorbing side handle
=
Direction-of-rotation indicator
%
Pin wrench
&
Clamping nut
(
Abrasive cut-off wheel / abrasive grinding
)
wheel
Clamping flange with O-ring
+
Guard
§
On/off switch
/
Switch-on interlock
:
Spindle
∙
Quick locking system
$
Guard release button
£
Threaded bushing for the grip
|
English
7
Publicidad
