Stop The Machine; Operation Tips; Operate As A Blower; Operate As A Vacuum - GreenWorks SBL24B00 Manual Del Operador

EN
11.2

STOP THE MACHINE

1. Release the trigger to stop the machine.
Wait until the motor stops after you stop the machine.
11.3

OPERATION TIPS

• Make sure that the machine is in good condition.
• Make sure that the tubes and guards are in position.
• Do not point the machine at the person or loose materials
before you start the unit.
• Ear protection is necessary to decrease the risk of hearing
loss related to noise level.
• Obey all applicable laws, regulations, standards and
ordinances.
11.4

OPERATE AS A BLOWER

1. Hold the machine tightly.
2. Operate from side to side.
3. Move the machine forward slowly.
4. Keep the collected unwanted materials in front of you.
Use rakes and brooms to loosen the unwanted material
before you blow.
Use the low speed to move dry items, and high speed to
move heavy items such as large unwanted materials or
gravel.
11.5

OPERATE AS A VACUUM

1. Hold the machine tightly.
2. Tilt the mulcher tubes ( in. or cm).
3. Use a sweeping action to collect light unwanted
materials.
1
NOTE
NOTE
NOTE
English
Make sure that you install and zip the bag.
12

MAINTENANCE

Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
12.1

CLEAN THE MACHINE

The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with a
vacuum cleaner.
• Do not spray the air vent or put the air vent in solvents.
• Clean the housing and the plastic components with a
moist and soft cloth.
12.2

CLEAN THE COLLECTION BAG

• Wear safety glasses and a dust mask.
• If it is necessary, clean the bag 1 time a year or more.
8
NOTE
CAUTION
CAUTION
WARNING
CAUTION