Install The Blower Tube; Install The Battery Pack; Remove The Battery Pack; Operation - GreenWorks BLF341 Manual Del Operador

WARNING
• If the parts have damage, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.

10.2 INSTALL THE BLOWER TUBE

1. Align the grooves (4) on the rear tube (2) with tabs
(5) on the blower housing.
2. Install the rear tube onto the blower housing until the
tabs engage the grooves.
3. Turn the rear tube in the direction of the arrow until
the two tabs lock into the positions.
4
2
4. Align the hole (6) on the front tube with the tab (7)
on the rear tube.
5. Install the front tube onto the rear tube until the tab
locks into the position.

10.3 INSTALL THE BATTERY PACK

5
7
6
English
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read and understand the instructions in the
battery and charger manual.
1. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.

10.4 REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
11

OPERATION

Make sure the blower tube is in position before
operation.

11.1 START THE MACHINE

8
1. Pull the trigger (1) to start the machine.
2. Pull the trigger fully to increase the speed.
3. Release the trigger to decrease the speed.

11.2 STOP THE MACHINE

1. Release the trigger to stop the machine.
Wait until the motor stops after you stop the machine.
7
WARNING
WARNING
1
NOTE
EN