Gardena ZoneProtect Instrucciones De Empleo página 16

4. MAINTENANCE
Clean the ZoneProtect with a damp cloth.
v
5. STORAGE
To put into storage:
The product must be stored away from
children.
1. Charge the battery.
2. Clean the ZoneProtect
(see 4. MAINTENANCE).
3. Store the ZoneProtect in a dry, enclosed
and frost-free place.
6. TROUBLESHOOTING
Problem Possible Cause Remedy
(L)
illuminates /
Zone cable is
blinks / flashes
not connected
blue
or cut.
(L)
illuminates /
Boundary cable
blinks / flashes
is not detected
purple and the
or cut.
mower is not in
ECO mode
(L)
illuminates /
ZoneProtect
blinks / flashes
overtemperature.
red Permanent error.
16
GAR_15021-20.960.05_2024-04-30.indd 16 GAR_15021-20.960.05_2024-04-30.indd 16
Problem
(L)
flashes
white 5 times
every 10 sec
Robotic lawn­
mower crosses
the zone cable
Robotic lawn­
mower stops
(Zone
Generator
Problem)
7. TECHNICAL DATA
ZoneProtect
Battery operation time (approx.)
v Connect the
zone cable.
Battery charging voltage
Battery charging current
v Check the
boundary
Battery charging time
cable.
IP Protection class
Operating temperature range
v Put the Zone-
Protect in the
Operating Frequency Band
shade and let
it cool down.
Max. radio­frequency power
Contact the
GARDENA
1) Maximum active output power to antennas in the fre-
Service.
quency band in which the radio equipment operates.
Possible Cause Remedy
Battery is empty v Charge the
or there is an battery or
error or the zone check the
cable is broken / zone cable.
unplugged.
Software transfer v Press and hold
error. the button
for 15 seconds.
Zone Generator v Enable the
function is not Zone Generator
enabled in the function in the
mower menu / mower menu /
app. app.
Battery is empty. v Charge the
battery.
ZoneProtect v Put the Zone-
overtemperature. Protect in the
shade and let it
cool down.
Unit
d
V
A
h
°C
Hz
1) mW
(8)
Value
31
5
1
6
IPx4
0 – 40
100 –
80000
< 25
30.04.24 09:52 30.04.24 09:52