BTI ST 140 E Manual Original página 29

Action
Connecting the dust extrac-
tion
Adjusting the Cutting Angle
Mounting the splinter guard
Orbital Action Settings
Adjusting the stroke rate
preselection
Switching the Power Tool
On/Off
Guide the power tool toward
the workpiece only when
switched on
Switching the worklight
On/Off
Lubrication when cutting
metal
Plunge Cutting
Maintenance and Cleaning
 For safe and proper working, always keep the
machine and the ventilation slots as well as
the tool holder clean.
Clean the saw blade holder regularly. For this, re-
move the saw blade from the machine and lightly
tap out the machine on a level surface.
2 609 932 867 • 21.11.12
Figure Please observe
5
6
7
8
9
10
11
12
13
14
Regularly spray penetrating oil onto the saw blade
holder (see figure 16, page 121).
Check the guide roller regularly. If worn, it must be
replaced through an authorised BTI after-sales ser-
vice agent.
Lubricate the guide roller occasionally with a drop
of oil (see figure 17, page 122).
Page
115 – 116
116 – 117
118
118
119
119
119
120
120
120 – 121
English | 29