Aqua Medic Ocean Clear Manual De Instrucciones página 10

First remove the adhesive strip from the fleece. Then place the fleece around the inner tube (Fig. 3, No. 1). The
glued-on guide rail is then positioned between the curved fleece. Now, slide the clamping rail (Fig. 3, No. 2)
over the tube with the fleece. The fleece is not glued tightly so that it can be removed more easily later. Then
wind up the fleece a little more (note the direction, see Fig. 1). Work as precisely as possible so that it winds up
straight later.
The fleece roll and winding spool with the motor inserted are mounted as shown in Fig. 1. The filter insert is
held together at the highest point with a connecting rod.
Fig. 4: Ocean Clear with DC Runner 1000 (not included)
The Ocean Clear can be operated completely independently with its own pump (Fig. 4). There is a black sealing
cap on the side of the filter housing (Fig. 1, No. 6). It can be cut open in a cross shape along the markings (Fig.
5) using a sharp cutter knife. An Aqua Medic DC Runner 800 or 1000 without hose connection is inserted
directly with its thread.
Fig. 5: Sealing cap for pump assembly
10