Publicidad
Idiomas disponibles
Idiomas disponibles
In order to guarantee the perfect conservation of all
engine components, an "overseas" packaging should be
used in case of maritime transport.
The packaging contains all the information needed to
carry out the loading and unloading operations.
During transport, make sure the load is properly secured
to the means of transport to avoid unexpected displace-
ments.
When transporting the uncovered engine by road, use
the lifting points provided to secure it steadily and pre-
vent components from being damaged.
UNPACKING
Follow the procedure below.
1 -Remove the cover of the packaging.
The packaging includes a bag with all the relevant tech-
nical documentation and standard components.
2 -While unpacking, make sure the components are
intact and their quantity is correct.
3 -Place the lifting device as shown in the figure.
4 -Loosen the screws (A) and disassemble the side
supports (B).
5 -Move the engine to the installation area.
If necessary, keep the material in case you need to pack
the engine in the future.
Important:
In case of any damage or missing part, contact the
manufacturer's Assistance Service to establish the
procedure to be adopted. The packaging material
should be suitably eliminated in compliance with the
applicable legislation.
English
screw A
supports B
15
MR 500
GB
Ed.4 - 02/2024
Publicidad
