Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
if the light source fails. The light source shall be removed at
the end of the product's useful life, with sorting and recycling
done separately.
Troubleshooting
Caution! Before troubleshooting, disconnect the power
supply. Only a qualified electrician of competent person
must do the troubleshooting that is not in this manual.
Important! There are some sounds during normal use
(compressor, refrigerant circulation).
Problem
Appliance does not
work
Appliance freezes
or cools too much
Possible Cause
• Temperature
regulation knob is
set at coldest
• Mains plug is not
plugged in or is
loose
• Fuse has blown or
is defective
• Socket is defective
• Temperature is
set too cold or the
appliance runs at
coldest.
17
Solution
• Set the knob at other switch on the
appliance.
• Insert mains plug.
• Check fuse, replace if necessary.
• Mains malfunctions are to be
corrected by an electrician.
• Turn the temperature regulator to a
warmer setting temporarily.
EN
Publicidad
