Cleaning and maintenance
Weekly cleaning of the brew group
1
2
Clean the brew group once per week.
1 Remove the coffee grounds container and open the service door.
2 Remove the coffee residues drawer.
3 To remove the brew group, press the lever and pull the brew group out
of the machine.
4 Rinse the brew group with fresh water and let it air dry.
5 Thoroughly clean the coffee outlet duct with the handle of a spoon or
with another rounded kitchen utensil.
6 To place the brew group back, make sure that the lever is in contact with
the base of the brewing unit. Note: If it is not in contact with the base, push
it down.
7 Make sure the locking hook of the brew group is in the correct position.
To position the hook correctly, push it upwards until it is in uppermost
position.
English
19