Meaning Of Error Codes; Troubleshooting - Gaggia Milano GAGGIA VELASCA PRESTIGE Instrucciones De Uso

Meaning of error codes

Error code
1
3 - 4
5
Other error codes

Troubleshooting

Problem
The machine does not
switch on
The machine is in DEMO
mode.
The drip tray is quickly
filled.
Problem
Coffee grinder blocked
The brew group cannot
be removed.
Water circuit problem
If the above solutions do not help to remove the error code icon from the
display and bring the machine back to normal working order, contact the
Gaggia hotline. Contact details can be found in the warranty booklet or or
visit www.gaggia.com or www.gaggia.it.
Cause
The machine is disconnected.
The standby button has been
pressed for more than 8 seconds.
This is normal. The machine uses
water to rinse the internal circuit
and brew group. Some water flows
through the internal system directly
into the drip tray.
Cause
Coffee exit duct clogged Clean the coffee exit
The brew group is not
positioned correctly.
There is air in the water
circuit.
Solution
Check if the power supply cord is
inserted correctly
Switch the machine off and then
on again using the main switch on.
Empty the drip tray when the 'drip
tray full' full indicator pops up
through the drip tray cover.
Place a cup under the dispensing
spout to collect rinsing water.
English
Possible solution
duct thoroughly with
the handle of the
multifunctional tool or a
spoon handle.
Close the maintenance
door. Switch the
machine off and back
on again. Wait for the
'machine ready' icon on
the display and then
remove the brew group.
Remove and place
back the water tank a
couple of times. Make
sure you insert it into
the machine properly.
Check if the water tank
compartment is clean.
Switch the machine off
and switch it back on
again after 30 seconds.
Try this 2 or 3 times.
25