Cleaning The Housing And Control Panel (As Required); Trouble-Shooting; Solving Problems Yourself - SEVERIN TO2061 Instrucciones De Uso

Horno de cocción y tostador
Ocultar thumbs Ver también para TO2061:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 82
Clean the tray under running water using a mild detergent, or in a
dish-washer.
5. Clean the inside of the oven window with a damp cloth.
6. After cleaning, wipe all components and the oven itself thoroughly dry
with a dishtowel.
7.2 Cleaning the housing and control panel (as
required)
1. Clean the oven housing including the control panel with a slightly damp,
lint-free cloth.
2. If this proves insuffi cient, add some mild detergent to the damp cloth.
3. Wipe dry with a dry cloth.
8

Trouble-shooting

Solving problems yourself

WARNING!
Risk of injury. The oven does not contain any
components that you can service or repair yourself.
– Never use a defective oven.
– Do not attempt to carry out any repair work
yourself. If a defect is found, contact our
Customer Service Department.
Before you contact our Customer Service or send the oven in, please use
the following table to check whether the problem can be solved at home.
Problem
Cause
The oven does
The power plug
not switch on.
is not inserted
/ the unit is not
connected to the
mains.
Smoke is
Fat is dripping
detected during
onto the heating
operation.
elements.
The food is
The pre-set
overcooked / too
cooking time is
dark.
too long / the
temperature is too
high.
Remedy
Insert the plug into the wall
outlet.
• Switch the oven off.
• Let it cool down completely.
• Clean the heating elements.
• Switch the oven off.
• Dispose of the burnt food.
• Select a shorter cooking time
or lower temperature for the
next cooking cycle.
39
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido