Carrying The Scooter; Assembly And Disassembly Of The Scooter - Vermeiren Ceres 3 Manual De Instrucciones

Ocultar thumbs Ver también para Ceres 3:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 120
L
WARNING:
If involuntary movements or braking occur, turn off the scooter as soon as it
is safe to do so.
Interfering electromagnetic fields may have a negative effect on the scooter's electronic systems.
These can include:
Disengagement of the engine brake
Uncontrollable behavior by the scooter
Unintentional steering movements
In the presence of very strong or enduring interfering fields, the electronic systems could even break
down entirely or suffer permanent damage.
Possible sources of radiation include:
Portable receiver and transmitter installations (receiver and transmitter with fixed antenna)
-
Transmitting and receiving sets
-
Cell phones or cordless telephones
-
portable TV, radio and navigation devices
-
other personal transmitting devices
Mobile medium-range transmitting and receiving devices (e.g. car antennas)
-
Fixed transmitting and receiving sets
-
Fixed mobile transmitting and receiving devices
-
Fixed radio, TV and navigation systems
Long-range transmitting and receiving devices
-
Radio and television towers
-
Amateur radio sets
Other home devices
-
CD player
-
Notebook
-
Microwave oven
-
Cassette recorder
-
etc.
Devices like electric shavers and hair dryers will have no influence provided that they function
perfectly and their cabling be in an excellent condition. Please conform to the operating instructions
accompanying such electric instruments to ensure trouble free operating of your scooter.
2.2

Carrying the scooter

The weight of the frame and steering unit is 43,80 kg for the Ceres 3 and 49,85 kg for the Ceres 4.
This is very heavy to carry.
The best way to carry the scooter is to make use of neutral mode of the scooter. Place the scooter in
neutral and roll the scooter to the desired place.
If this is not possible you can carry the scooter by following steps:
1. Remove loose parts (basket, armrests, seat and batteries)
2. Store loose parts in a safe place
3. Carry the frame + steering unit with 2 persons to the desired place. Take the frame on the
front and the back. Only on the fixed parts from the frame.
2.3

Assembly and disassembly of the scooter

L
WARNING:
Risk of injury - Make sure that all movable parts are assembled properly.
L
WARNING:
Risk of injury - Be careful not to cut or bruise yourself with the cables.
L
WARNING:
Risk of injury - Turn the scooter off before disassembly.
Page 9 
Ceres 3, Ceres 4
2015-03

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ceres 4

Tabla de contenido