Stihl KM 55 Manual De Instrucciones página 17

English / USA
Starting
: Hold down the trigger interlock and
squeeze the throttle trigger.
: Keep both levers in that position.
: Move the slide control to START
position and hold it there.
: Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the
starting-throttle position.
: Go to "All Versions"
16
3 1 2
5
7 6
Version with Loop Handle
Controls
Stop switch (1) with positions:
Normal run position I (2), and
O – Stop (3).
Throttle trigger interlock (4).
Throttle trigger (5) with tongue (6) and
catch (7).
4
Starting
: Move stop switch to position I
: Hold down throttle trigger interlock.
: Squeeze the throttle trigger until the
catch on the tongue (6) can be
engaged on the housing.
: Release the throttle trigger, tongue
and throttle trigger interlock in that
order. This is the starting throttle
position.
: Go to "All Versions".
6
KM 55