Modifying The Motor Rotation Direction; Modifying The Wheel Rotation Direction; Erasing All Transmitters Of The Motor; Erasing Sensor Of The Motor - SOMFY Sonesse 30 RTS Guia De Instalacion

7.10. Modifying the motor rotation direction

Move the shade away from the end limits.
1) Press the UP and DOWN buttons simultaneously,
until the shade makes an Up and Down movement.
2) Press the My button, until the shade makes an Up
and Down movement, to reverse the rotation direction.
3) Press the UP button to check the new direction of
rotation.

7.11. Modifying the wheel rotation direction

Move the shade away from the end limits.
1) Press the UP and DOWN buttons simultaneously,
until the shade makes an Up and Down movement.
2) Press the UP, My and DOWN
buttons simultaneously, until the shade makes an Up
and Down movement, to reverse the wheel rotation
direction.

7.12. Erasing all transmitters of the motor

To delete all transmitters programmed, press and hold
the motor prog button, until the shade makes an Up and
Down movement twice.
All transmitters are deleted.

7.13. Erasing sensor of the motor

1) To delete all sensors programmed, press and hold
the RTS programmed control point (A) PROG button
or the motor PROG button until the shade makes an Up
and Down movement.
2) Press and hold the RTS sensor (C) PROG button
until the shade makes an Up and Down movement
twice.
All sensors are deleted.
Copyright © 2013-2016 Somfy SAS. All rights reserved
x2
PROG.
A
1
3
1
1
PROG.
A
PROG.
A
2
PROG.
C
2
2
x2
x2
PROG.
C
x2
x3
PR
13