Voice Dialing; Assign A Voice Tag To An Entry; Dial A Number - Nokia 2116i Manual Del Usuario

C o n t a c t s

Voice dialing

You can dial up to 25 stored numbers using voice dialing.
Before using voice tags, note the following:
• Voice tags are not language dependent. They are dependent on the
speaker's voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and use
them in a quiet environment.
• Very short names are not accepted. Use long names, and avoid similar
names for different numbers.
Using voice tags may be difficult in a noisy environment or during an emergency,
so you should not rely solely upon voice dialing in all circumstances.

Assign a voice tag to an entry

Before you can use voice dialing, you must first assign a voice tag to the number.
1. In the standby mode, use scroll down to enter the contacts list.
2. Highlight the contact you want to assign a voice tag, and select
Options > Add voice
3. Select Start; then speak clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The device automatically stops recording, saves, and replays the voice tag.
appears next to the phone numbers that have voice tags assigned.
If recording is not successful, your device displays
select Options > Add voice

Dial a number

1. In the standby mode, select and hold Contacts.
2. When you hear several beeps and
3. Say the voice tag clearly into the microphone.
When the device finds the voice tag,
dials the number. If the device does not locate a number or recognize the voice
tag, No match found
Voice tag options
After you have added a voice tag to a contact, you can choose one of the
following options:
28
tag.
tag, and repeat Step 3.
Speak now
Found:
appears.
Voice system
appears, release the key.
appears, and the device automatically
Details >
error. In this case,