Voice Commands; Activate A Voice Command - Nokia 2116i Manual Del Usuario

In the standby mode, select
update of date & time
If you use the Auto-update of date & time
network, you may be prompted to enter the time manually. Network time will
replace the time and date when you re-enter your digital network.
If your battery is removed or discharged outside the digital network, you may be
prompted to enter the time manually (once the battery is replaced or recharged
and you are still outside of the digital network).

■ Voice commands

Voice commands allow you to quickly perform certain commands by speaking
them, instead of using the keypad to access them. For example, you can switch
your profile, call voicemail, playback a voice memo, or review recent calls by
speaking the recorded command.
Add a voice command
Before using a voice command, you must add the command to the device function.
1. In the standby mode, select
2. Select the device function you wish to tag: Profiles,
recorder, or Call
3. If necessary, select an option associated with that function, and select
Options > Add command.
4. Select Start, and speak the voice command clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The device replays then saves the recorded command.
functions that have voice commands assigned.

Activate a voice command

After you have associated a voice command with a device function, you can
request the function by speaking the voice command.
1. In the standby mode, select and hold Contacts.
2. When Speak now
When the device finds the voice command,
the recognized voice command through the earpiece. The function you requested
is activated.
Menu > Settings
> On, Confirm first, or Off.
Menu >
log.
appears, say the voice command clearly into the microphone.
> Time and date settings
option while outside your digital
Settings > Voice commands.
Voice
appears next to
Found: appears, and the device plays
S e t t i n g s
> Auto-
mailbox, Voice
53