SEVERIN HT 0141 Instrucciones De Uso página 10

from the wall socket after use, and also
in the event of any malfunction.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ Do not place the appliance on any
surfaces sensitive to heat during or
immediately after use.
∙ No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
∙ This appliance is intended for domestic or
similar applications, such as
- in shops, offi ces and other similar
working environments,
- in agricultural working environments,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
Cable retract mechanism
Unwind the cable before use.
To unwind, pull the cable downwards, but be
careful not to pull it out further than the red
mark.
To allow the power cord to rewind
automatically, press the retract button while
holding the plug.
Styling nozzle
The styling nozzle can be fi tted to the air
outlet to facilitate shaping the hair during
blow drying.
Volume diffusor
The volume diffusor is also fi tted to the air
outlet.
The volume diffusor is used to maintain the
volume of the hair. Move the diffusor with a
slightly circular motion over the head.
10
Air-fl ow and temperature controls
By using different combinations of the
air-fl ow and temperature controls, various
settings are possible when drying the hair.
The air-fl ow control regulates the air-fl ow
intensity, while the temperature control
regulates the heat of the air-fl ow.
With the air-fl ow control set to the
'0'-position, the hair-dryer is switched off.
Cool function
The cool function can be used at any time
during the drying process. It will supply
cooler air, which helps fi rming and shaping
the hair.
Operation
Connect the hair dryer to a suitable wall
socket and select the desired power setting
with the switches integrated in the handle.
Cleaning and care
∙ Before cleaning the hair dryer, remove
the plug from the wall socket and let the
appliance cool down completely.
∙ To avoid the risk of electric shock, do
not clean the appliance with liquids or
immerse it.
∙ If necessary, the housing of the hair dryer
may be wiped with a dry lint-free cloth.
∙ The air intake grilles on the side should
be cleaned regularly with a soft brush.
∙ The rear intake grill can be removed for
easy cleaning by turning it anti-clockwise.
Remove any accumulated lint particles or
hair; replace the grill after cleaning and
lock it by turning clockwise.