Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
RECALLING & CLEARING
READINGS
This thermometer automatically stores the last
30 readings taken. To view the readings stored in
memory, follow these steps:
Press the EAR / POWER button to turn
1.
the thermometer on.
Press the MEM button to recall the most
2.
recent measurement, Fig. 1.
3.
The display will show the measurement
results, date/time and measurement
type – ear, forehead or object. If the audio
is enabled, the results will be announced
aloud.
Press and release the MEM button to
4.
scroll through the readings from newest
to oldest. The index number in the bottom
left of the display indicates the sequential
number of the stored reading on the screen,
Fig. 2.
5.
After 30 measurements have been stored
in the memory, the oldest reading will be
automatically deleted.
After review, press the EAR/POWER button to
enter measurement mode, or stop-using and the
thermometer will automatically shut off after
60-seconds of non-use.
Fig. 1
Fig. 1
English • 17
Publicidad
Tabla de contenido
