smartheart 01-556 Manual De Uso página 17

MEMORY FUNCTIONS
Clearing Measurements from
Memory
1. Press and release the MeM button to access
the memory bank feature. Then, press and
hold the MeM button 4–6 seconds until the
display shows 'deL' for delete, Fig 1.
2. While the display shows 'deL', press and
release the MeM button. The display will
show 'deL no', Fig 2.
3. Press and release the MeM again, and the
display will show 'deL yeS', Fig 3.
4. While the display shows 'deL yeS', p ress the
START/SToP button to delete all of the
readings in the device memory.
The unit will automatically turn off after the
memory is cleared.
noTe: you must press the START/SToP button to
erase the readings in memory. If you do not
press the button, the unit will turn itself off and
the memory will not be cleared.
Fig. 1
Fig. 2
Fig. 3
17
English –