General Warnings - SMA SUNNY BOY 3.0-US Instrucciones De Instalación

General Warnings

Observe the operating instructions
Read the documentation of the product before working on it. Follow all safety
precautions and instructions as described in the documentation.
General Warnings
All electrical installations must be carried out in accordance with the local electrical standards
and the National Electrical Code
C22.1. This document does not replace and is not intended to replace any local, state,
provincial, federal or national laws, regulations or codes applicable to the installation and use of
the product, including without limitation applicable electrical safety codes. All installations must
conform with the laws, regulations, codes and standards applicable in the jurisdiction of
installation. SMA assumes no responsibility for the compliance or non-compliance with such laws
or codes in connection with the installation of the product.
The product contains no user-serviceable parts.
Before installing or using the product, read all of the instructions, cautions, and warnings in this
manual.
Before connecting the product to the electrical utility grid, contact the local utility company. This
connection must be made only by qualified personnel.
Wiring of the product must be made by qualified personnel only.
4 SB30-77-1SP-US-40-IA-xx-13
®
ANSI/NFPA 70 or the Canadian Electrical Code
SMA Solar Technology America LLC
®
Installation Manual
CSA