Configuring The Inverter - SMA SUNNY BOY 3.0-US Instrucciones De Instalación

SMA Solar Technology America LLC
7.5

Configuring the Inverter

After you have logged onto the user interface as Installer, the Configuring the Inverter page
opens.
A
E
D
Figure 14 : Layout of the Configuring the Inverter page
Position Designation
A Device information
B User information
C Skip configuration
D Checkbox
E Configuration options
Procedure:
On the Configuring the Inverter page, three configuration options are available to choose from.
Select one of the three options and proceed for the selected option as described below. SMA
recommends carrying out the configuration with the Installation Assistant. This way, you ensure that
all relevant parameters are set for optimal inverter operation.
• Adopt the configuration from a file
• Configuration with the Installation Assistant (recommended)
• Manual configuration
Installation Manual
Description
Provides the following information:
• Device name
• Inverter serial number
• Inverter firmware version
Provides brief information on the listed configuration op-
tions
Offers the option of skipping the inverter configuration
and go directly to the user interface (not recommended)
Allows you to choose not to have the displayed page dis-
played again when the user interface is called up again
Provides a selection of the various configuration options
SB30-77-1SP-US-40-IA-xx-13
7 Commissioning
B
C
53