Barbecue Grill - SEVERIN PG 8546 Instrucciones De Uso

GB

Barbecue grill

Dear Customer,
Before using the appliance, read the
following instructions carefully and keep
this manual for future reference. The
appliance must only be used by persons
familiar with these instructions.
General information
∙ The barbecue grills are available in
different configurations.
∙ Depending on the model, the grill may
be provided with or without a wind
shield, or a height-adjustable grill rack
with a separate handle.
∙ Assemble the grill according to the
matching diagram I.
Grill models with additional base stand:
∙ Assemble the base stand according to
the schematic diagram (II), and then
place the grill onto the stand. The small
feet under the grill connect with the tops
of the vertical legs of the base stand.
Ensure that the grill and base stand are
placed in a safe and stable position.
∙ The power cord should be routed in
such a way that no one is likely to trip
over it.
Important safety instructions
∙ This appliance is
designed for outdoor
use only; it must not be
operated within enclosed
spaces.
∙ The equipment should
only be connected to an
earthed socket installed
in accordance with the
regulations. It must
be operated with an
additional earth-leakage
circuit-breaker with a
rated tripping current not
exceeding 30mA.
∙ Make sure that the supply
voltage corresponds with
the voltage marked on the
rating label.
∙ The power cord should
be regularly examined for
any signs of damage. In
the event of such damage
being found, the appliance
must no longer be used.
11